+216 74 672 833 | +216 74 680 164
Our Products
You are here:
VERTICAL CUTTING MACHINE BA-S101
HORIZONTAL CUTTING MACHINE WITH ROTATING TABLE BA-S214
HORIZONTAL CUTTING MACHINE WITH ROTATING TABLE BA-S214 (6 BLOCKS:1900X1400MM)
HORIZONTAL CUTTING MACHINE BA-S205
CONTOUR CUTTING MACHINE BA-S102
PEELING FOAM MACHINE BA-S109
GRINDING MACHINE BA-S103
GRINDING MACHINE BA-S203
COVERING MATTRESS MACHINE BA-S CM100
HORIZONTAL CUTTING MACHINE (2 BLOCKS) BA-S105
FORING MACHINE
SANDWICH PANEL CUTTING MACHINE BA-S SW100
VERTICAL CUTTING MACHINE BA-S101
DESCRIPTION
The vertical cutting machine BA-S101 is compound of fixed cutting set and a manual moving table.
The guiding plate of the block is a light construction of aluminium.
The guiding plate of the block is a light construction of aluminium.
- The adjustment of the cutting thikness is controlled by a steering wheel.
- The maximum wide cutting : 2200mm
- Length of cut : 1500mm
- Weight : 1065kg
INSTALLATION SPACE
- Length : 4400mm
- Width : 4000mm
- Height : 3300mm
HORIZONTAL CUTTING MACHINE WITH ROTATING TABLE BA-S214
DESCRIPTION
The horizontal cutting machine with rotating table BA-S214 is equipped with a stationary cutting unit and a tournante table.It is designed for cutting 3, 4 and 5 foam block at a time
A transmission of the turning table by a moto-reducing with an infinitely variable frequencies change.
A transmission of the turning table by a moto-reducing with an infinitely variable frequencies change.
- An empty part in the cutting zone.
- An electronic setting of the cutting thickness.
- The strip sharpening is insured by a grinding unit.
- Cutting speed reach : 82 m/mn.
- An effective height of cutting up is 1370mm.
INSTALLATION SPACE
- Length : 6700mm
- Width : 6700mm
- Height : 4200mm
HORIZONTAL CUTTING MACHINE WITH ROTATING TABLE BA-S214 (6 BLOCKS:1900X1400MM)
DESCRIPTION
The horizontal cutting machine with rotating table BA-S214 is equipped with:
- A stationary cutting unit and a turning table.
- It is designed for cutting 6 foam block at a time
- A transmission of the turning table by a moto-reducing with an infinitely variable frequencies change.
- An empty part in the cutting zone.
- An electronic setting of the cutting thickness.
- The strip sharpening is insured by a grinding unit.
- Cutting speed reach : 82 m/mn.
- An effective height of cutting up is 1370mm.
INSTALLATION SPACE
- Length : 6700mm
- Width : 6700mm
- Height : 4200mm
HORIZONTAL CUTTING MACHINE BA-S205
DESCRIPTION
This type of saw is conceived for the cutting up of soft foam.
The horizontal cutting machine BA-S205 is equipped with a cutting unit and a block holder table which is equipped with a depression unit.
The horizontal cutting machine BA-S205 is equipped with a cutting unit and a block holder table which is equipped with a depression unit.
- The machine works with either manual or automatic mode.
- Limit height : 1300 mm
- Cutting length : 2000 mm
- Maximum width of the block : 2000 mm
- Cutting thickness varies from 3 to 200 mm
- Maximum height of the block : 1300 mm
INSTALLATION SPACE
- Length : 6000 mm
- Width : 6000 mm
- Height : 4000 mm
CONTOUR CUTTING MACHINE BA-S102
DESCRIPTION
The contour cutting machine BA-S102 is a set simply guided by hand following the model with help of the 6 mm diameter feeler gauge tracer.
The vertical movement of the block holder table is done by an electrical motor.
This block holder is equipped with a depression system which cuts small pieces of foam without difficulties.
The block holder is a moving plexiglas plaque with a horizontal movement.
This block holder is equipped with a depression system which cuts small pieces of foam without difficulties.
The block holder is a moving plexiglas plaque with a horizontal movement.
- The cutting tool is a 1 to 1.5 mm endless wire.
- Length of cut: 1000 mm
- Width of cut : 1400 mm
- Height of cut : 1000 mm
INSTALLATION SPACE
- Length :3100mm
- Width : 2700mm
- Height : 2400mm
PEELING FOAM MACHINE BA-S109
DESCRIPTION
This Peeling machine BA-S109 is equipped with:
- A cylinder, which twins over an axis
- The transmission of the cylinder is done by a tangential advance roller (The maximum diameter of this cylinder is 1350 mm)
- A suction device for the grinding dust.
- A metric roller.
- The adjustment of the cutting thickness is done by an interchangeable cogwheel.
- The cutting thickness dimension varies between 3 to 20 mm
- The unrolling speed can indefinitely be adjusted from 5 to 110 m/mn.
- The band knife width is 30 mm
- Only soft foam and agglomerated can be rolled (maximum of density 200kg/m3)
INSTALLATION SPACE
- Length :6000 mm
- Width : 4500 mm
- Height : 2000 mm
GRINDING MACHINE BA-S103
DESCRIPTION
The soft foam grinding machine the BA-S103 is composed of a foam porter, a grinding part and a sieve.
Through the integrated porter systeme, the grinding piece can be long.
Through the integrated porter systeme, the grinding piece can be long.
- The maximum width of the grinding piece is 620 mm
- The maximum height of the grinding piece is 170 mm
- Grinding speed: 4 m/mn
- Production capacity : until 1000 kg / day
INSTALLATION SPACE
- Length :2500mm
- Width : 1500mm
- Height : 2000mm
GRINDING MACHINE BA-S203
DESCRIPTION
The grinding machine BA-S203 is conceived to reduce, with homogenous granulometric, dusts of polyurethane foam and other similar material.
This permits to recycle materials which normally should have been rid off.
The unit is equipped with an electrical powerful motor having strips.
This permits to recycle materials which normally should have been rid off.
The unit is equipped with an electrical powerful motor having strips.
INSTALLATION SPACE
- Length : 1400 mm
- Width : 1400mm
- Height : 1600mm
- Weight : 140 kg
COVERING MATTRESS MACHINE BA-S CM100
DESCRIPTION
The covring matress machine is mainly used for the covering of the matress which has the following characteristics :
- A table made in roller to facilitate movement of the mattress
- A lateral pressure on the mattress made by two belts that push the mattress to the front to cover.
- Width of mattress: 400 mm to 1600 mm for a thickness between 60 mm and 250 mm
- Dimention of machine : 3180 mm x 2250 mm for a height of 1400 mm.
- Production capacity : varies between 70 and 90 mattresses / hour
HORIZONTAL CUTTING MACHINE (2 BLOCKS) BA-S105
DESCRIPTION
The horizontal cutting machine BA-S105 is designed for cutting the flexible foam with table into 2 blocks.
This horizontal cutting machine is composed of a stationary cutting unit and a table with 2 door blocks that are equipped with a vacuum unit.
The machine works in manual or automatic mode.
This horizontal cutting machine is composed of a stationary cutting unit and a table with 2 door blocks that are equipped with a vacuum unit.
The machine works in manual or automatic mode.
- The height limit is 1300 mm
- Cutting length : 2000 mm
- Cutting width : 2000 mm
- Thickness cutting : de 3 à 200 mm
- Maximum height of the block : 1300 mm
INSTALLATION SPACE
- Length : 6000mm
- Width : 6000mm
- Height : 4000mm
FORING MACHINE
DESCRIPTION
Drilling machine blocks
SANDWICH PANEL CUTTING MACHINE BA-S SW100
DESCRIPTION
This vertical saw is designed for cutting sandwich panel.
It consists of a cutting unit moved forward to cut the sandwich panel and a fixed table that it is made roller to facilitate movement of the panel sandwich before and after the cutting.
It consists of a cutting unit moved forward to cut the sandwich panel and a fixed table that it is made roller to facilitate movement of the panel sandwich before and after the cutting.
- Cutting length : 1150 mm
- Cutting hight : 200 mm
- Cutting speed : 36 s / m
- 02 Tables move laterally on the machine till 6m.
INSTALLATION SPACE
- Length : from 3000 m to 15000 mm
- width : 3000 mm
- hight : 2500 mm
CONTACT US
INFORMATIONS
GIMO
Generale Industrie Machines Outils” is a company created in 1992. It remains the Tunisian leader in the manufacturing of polyurethane foam cutting machines and exports more than 80% of its production (its machines) to Africa such as Libya, Algeria, Morocco, Benin, Cameroon.
© 2023 Expert Dev Solutions. All rights reserved.